| CPUPOWER-SET(1) | cpupower Manual | CPUPOWER-SET(1) |
NAME¶
cpupower-set - Set processor power related kernel or hardware configurations
SYNOPSIS¶
cpupower set [ -b VAL ] [ -s VAL ]
DESCRIPTION¶
cpupower set sets kernel configurations or directly accesses hardware registers affecting processor power saving policies.
Some options are platform wide, some affect single cores. By default values are applied on all cores. How to modify single core configurations is described in the cpupower(1) manpage in the --cpu option section. Whether an option affects the whole system or can be applied to individual cores is described in the Options sections.
Use cpupower info to read out current settings and whether they are supported on the system at all.
Options¶
--perf-bias, -b
The range of valid numbers is 0-15, where 0 is maximum performance and 15 is maximum energy efficiency.
The processor uses this information in model-specific ways when it must select trade-offs between performance and energy efficiency.
This policy hint does not supersede Processor Performance states (P-states) or CPU Idle power states (C-states), but allows software to have influence where it would otherwise be unable to express a preference.
For example, this setting may tell the hardware how aggressively or conservatively to control frequency in the "turbo range" above the explicitly OS-controlled P-state frequency range. It may also tell the hardware how aggressively it should enter the OS requested C-states.
This option can be applied to individual cores only via the --cpu option, cpupower(1).
Setting the performance bias value on one CPU can modify the setting on related CPUs as well (for example all CPUs on one socket), because of hardware restrictions. Use cpupower -c all info -b to verify.
This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.
--sched-smt, -s [ VAL ]
--sched-smt utilizes thread siblings of one processor core first before processes are scheduled to other cores.
The impact on power consumption and performance (positiv or negativ) heavily depends on processor support for deep sleep states, frequency scaling and frequency boost modes and their dependencies between other thread siblings and processor cores.
Taken over from kernel documentation:
Adjust the kernel's multi-core scheduler support.
Possible values are:
1 - Fill one thread/core/package first for long running threads
2 - Also bias task wakeups to semi-idle cpu package for power savings
SEE ALSO¶
cpupower-info(1), cpupower-monitor(1), powertop(1)
AUTHORS¶
--perf-bias parts written by Len Brown <len.brown@intel.com> Thomas Renninger <trenn@suse.de>
| 22/02/2011 |